What are the maintenance techniques for cork flooring?

If there is wear in some places after three or five years, it can be partially compensated, that is, the coating is re-applied at the local part. The method is very simple. Gently sand the sand at the worn place to remove the scale on the surface. Then wipe it gently with a dry soft cloth, repaint the coating, or apply a polyester film to the area.

For the surface painted cork flooring, the maintenance is the same as the solid wood floor. Generally, the floor wax can be used once every six months. Cork flooring with a resin-resistant layer on the surface is as simple as a composite floor.

Prevent heat damage. Do not place hot objects such as hot water cups directly on the floor to avoid scalding the surface paint film. At the same time, it should be avoided to expose the sun to the floor for a long time, so as to prevent premature cracking and aging after the paint film is exposed to ultraviolet light for a long time.

After 24 hours of floor installation, the furniture can be placed on the floor, and the movement of people on it should be minimized within 24 hours. When leaving home, please close the window, door, especially the faucet, so as not to let the rain or drip soak the floor.

The maintenance of cork flooring is easier than other wooden floors. During use, it is best to avoid the sand being brought into the room, with some sand particles being brought in and not wearing the floor. Because the sand is pressed into the elastic layer under the foot, it will be ejected when the footsteps leave. Of course, it should be reminded here that it is not advisable to bring in too much sand, so that there will still be flow wear. Therefore, the sand that is brought into the room should be removed in time. Generally, there is no need to equip the vacuum cleaner, and there is no need to worry about the warpage, mildew, etc. phenomenon.

It is recommended to lay a foot pad at the door to reduce the abrasion of the sand on the floor. It is only after 24 hours of floor installation that the furniture can be placed on the floor and people should be prevented from walking around within 24 hours.

When washing the floor, do not rinse, polish or clean with water. The maintenance of the surface painted cork floor is the same as that of the solid wood floor. Generally, the floor wax is used once every six months; usually, it is only necessary to use a wrung mop or a rag to wipe. Places that are difficult to clean are removed with a special cleaner. Avoid strong impact on the floor, carry furniture to lift, and can not directly drag, furniture legs need to pad.

If it is used in places with large traffic flow, if there is wear and tear in some places after three or five years, it can be partially compensated, that is, the coating is reapplied at the local part. The method is simple and light in the wear and tear. Lightly sand the paper to remove the dirt on the surface, then wipe it gently with a dry soft cloth, repaint the coating, or apply a polyester film to the area.

1, with a vacuum cleaner, tweezers, a semi-dry rag;

2, local smudges can be wiped with an eraser, can not be removed with a sharp weapon;

3. If it is a waxed wallboard, it can be wiped clean with a damp cloth.




Relevant recommended products

Houshold Aluminum Foil(SGS TUV FDA certificate)

Hot Sales Smd 3014 Led Strip 12V 54Cm 54Leds 4Mm Wide

36W Work Roat LED Street Light CMAX-S2

2017 PPR Pipe for Landscape Irrigation Drainage System Made in China

Leisure synthetic turf landscaping turf grass artificial for rooftop gardens

Leave a Reply

Your email address will not be published. Required fields are marked *