Advantages of marble composite panels

Marble is a natural product. There are no two identical stones in the world. The texture and color of each piece of stone are different. Even the same piece of material, the texture and color of every two places are not necessarily the same. The unique texture and color are the value of marble, with a stronger artistic appeal and decoration effect. To minimize chromatic aberration, it is recommended to pre-arrange it before paving. Composite marble is generally made up of 3mm stone and brick. The marble surface of the composite marble is treated by crystal face, which is basically non-sucking; the bottom of the ceramic blank is completely water-free and has no water spots; when paving, the composite marble is waterproofed, and it is not easy to have reverse osmosis. Ten advantages of composite stone:
I. Light weight
The thinnest marble composite board can be only about 5mm thick (composite with aluminum composite panel). The commonly used composite tiles are only about 12mm thick, which saves a lot of cost in transportation and is the best choice for the building with load restrictions.
Second, the strength is improved
After the composite of marble and ceramic tile, aluminum honeycomb panel, the strength of bending, folding and shear-resistant crushing is obviously improved, the strength is increased by more than 5 times, and the transportation is greatly reduced. Damage rate during installation and use.
Third, the anti-pollution ability is improved
ordinary marble rough in the installation process, such as cement wet paste, cement mortar chemical changes to form calcium hydride, easy to cause reverse osmosis, resulting in a variety of marble surface The color change and stains, while the marble composite board minimizes the occurrence of this phenomenon (because the back stone product itself does not have secondary contact with the pasted material).
Fourth, it is easier to control the color difference
Because marble is cut into a number of thin plates with original stone material and then composited with ceramic tiles and other materials, the pattern and color transition are natural, and it is easier to ensure the use of large areas. The consistency of color and pattern.
V. Installation cost reduction
Because of the above characteristics, in the installation process, regardless of quality, strength or color separation, the installation efficiency and safety are greatly improved, and the installation cost and installation cost are also reduced. The tiles are the same.
Sixth, natural environmental protection
Traditional stone natural mineral radiation is relatively large, marble composite board on the one hand can reduce the use of natural resources, on the other hand is to minimize radiation, thereby achieving environmental protection purposes.
Seven, the construction loss rate is greatly reduced
Because of the heavy weight of the marble, the transportation and paving costs are high, the processing level is not enough, and the construction process is prone to breakage, and the composite board is uniform in strength due to its strength. In transportation and installation, a part of the cost is saved, and for the more expensive stone varieties, the composite board is made to have a lower cost than the original board, and the construction loss is small.
Advantages of stone composite panels
Eight, a variety of colors
composite panels greatly improve the strength of marble, so you can make a lot of ordinary marble can not do the size and color, greatly enhance the marble Application range.
Nine, break through the restricted area
marble decorative parts, no matter indoor, ground, window sill, porch, table top, etc., the ordinary original board (the whole body board) is not a problem, only the ceiling is either marble or Granite, any decoration company can’t and can’t take this risk. The composite board of marble and aluminum-plastic board and aluminum honeycomb has broken through the restricted area of ‚Äč‚Äčthis stone decoration. Because it is very light, it weighs only 1/5 to 1/10 of the body board.
Ten, energy saving, reducing consumption:
stone aluminum honeycomb composite board because of its sound insulation, moisture, heat preservation performance, therefore, after indoor and outdoor installation can greatly reduce the consumption of electrical energy and thermal energy
(provided by Shenyang Building Materials Network) <

Relevant recommended products

Hot Rolled Steel Billet 3SP Standard 185mm

Lightweight insulating brick

Twisted rope lanyard

Ceiling Frame Matching With Ceiling Board

Nonwoven Geotextile for Road Construction

Leave a Reply

Your email address will not be published. Required fields are marked *